TB-6201 FURNITURE SERIES HIGH STRENGTH UV ADHESIVE

Product ID: 2499

Hits: 150

Company: Guangzhou top-bond environmental technology Co.,LTD

Release Time:2018-09-28 13:50:13

Keywords: light cure adhesive   /   engineering adhesive   /   Plastic adhesive

Inquiry    Favorite

Five Advantages Of Products

  • Low odor
  • Safety and environmental protection
  • Fast solidification without air bubbles
  • High bonding strength
  • Don't send white

Product Details

TOP-BOND  Product 6201 is a single component, low viscosity, fast curing UV adhesive designed for bonding glass

to itself and to a variety of other surfaces. The product cures in seconds upon exposure to ultraviolet radiation of 365 nm to form an impact resistant bond which exhibits excellent resistance to prolonged humidity or water immersion

TYPICAL APPLICATIONS

Bonding and sealing or potting applications of glass to aluminum or Stainless Steel, such as glass furniture and artware.

PROPERTIES OF UNCURED MATERIAL

 Typical Value

Chemical Type                     Modified acrylate

Appearance                       Clear, pale straw

Specific Gravity @ 25°C                 1.04

Viscosity @ 25°C, mPa.s (cP)            800

Brookfield

Refractive Index @ 25°C, Nr                    1.479

Toxicity                               Low

Flash Point (TCC), °C                   >93

TYPICAL CURING PERFORMANCE

Cure Conditions

Cure can be effected with both low and high intensity ultraviolet light sources. A low UV intensity of 30 mW/cm2 will cure highly transmitting substrates with < .010” gap in 5 seconds or 0.070” to 0.090” gaps in 10 to 20 seconds. A high UV intensity of 100 mW/cm2 will cure highly transmitting substrates with < .010” gap in 2 seconds or 0.100” to 0.200” gaps in 10 to 20 seconds. The table below represents typical fixture times for glass substrates with no induced gap. Full cure is estimated to be 6X the fixture time upon continued exposure to UV radiation.

 

NOTE:  UV irradiances are measured at 365nm with an OAI 306 UV Powermeter.

 

 

Storage

Products shall be ideally stored in a cool, dry location in unopened containers at a temperature between 8° to 28°C (46° to 82°F) unless otherwise labeled. Optimal storage is at the lower half of this temperature range. To prevent contamination of unused product, do not return any material to its original container. For specific shelf-life information, contact your local

Technical Service Center.

 

Note

The data contained herein are furnished for information only and are believed to be reliable. We cannot assume responsibility for the results

obtained by others over whose methods we have no control. It is the user's responsibility to determine suitability for the user's purpose of any

production methods mentioned herein and to adopt such precautions as may be advisable for the protection of property and of persons against any hazards that may be involved in the handling and use thereof. In light of the foregoing.TOP-BOND Corporation specifically disclaims all warranties expressed or implied, including warranties of merchantability or fitness for a particular purpose, arising from sale or use of TOP-BOND Corporation’s products. TOP-BOND Corporation specifically disclaims any liability for consequential or incidental damages of any kind, including lost profits. The discussion herein of various processes or compositions is not to be interpreted as representation that they are free from domination of patents owned by others or as a license under any TOP-BON Corporation patents that may cover such processes or compositions. We recommend that each prospective user test his proposed application before repetitive use, using this data as a guide. This product may be covered by one or more China or foreign patents or patent applications.


Inquiry

Shrink